Workshop-Moderators
https://conference.eurospi.net/images/eurospi/2020/damjanekert.jpg
Gerhard Griessnig
AVL, Austria
Damjan Ekert
ISCN GmbH, Austria
Samer Sameh
VALEO, Egypt
https://conference.eurospi.net/images/eurospi/2020/damjanekert.jpg
Gerhard Griessnig
AVL, Austria
Damjan Ekert
ISCN GmbH, Austria
Samer Sameh
VALEO, Egypt
About Standards
In systems, software, services development more and more ISO, IEC, SAE IEEE standards, are published and need to be considered. With every technology push on the market the standards are adapted to fulfil the new needs. For instance, the development of smart connected cars and industry 4.0 leads to a high demand for cybersecurity norms. In general there is a large variety of engineering standards in ISO/IEC, SAE, IEEE, and national standards. Depending on the domain (Automotive, Medical, Aerospace, IT services, SMEs, etc.) different norms are applicable. Still many norms show cross-sector synergy potentials. For instance the medical device and Automotive safety relevant standards contain complementary best practices where each group can learn from the other. Additionally there are norms dealing with innovation management and with process improvement and change management. Etc.
In this workshop series every year different ISO standards and assessment models will be introduced, explained, and discussed. This should offer an entrance to the world of norms but also to offer help in selecting the norms or integrating them and why to use a specific norm.
In systems, software, services development more and more ISO, IEC, SAE IEEE standards, are published and need to be considered. With every technology push on the market the standards are adapted to fulfil the new needs. For instance, the development of smart connected cars and industry 4.0 leads to a high demand for cybersecurity norms. In general there is a large variety of engineering standards in ISO/IEC, SAE, IEEE, and national standards. Depending on the domain (Automotive, Medical, Aerospace, IT services, SMEs, etc.) different norms are applicable. Still many norms show cross-sector synergy potentials. For instance the medical device and Automotive safety relevant standards contain complementary best practices where each group can learn from the other. Additionally there are norms dealing with innovation management and with process improvement and change management. Etc.
In this workshop series every year different ISO standards and assessment models will be introduced, explained, and discussed. This should offer an entrance to the world of norms but also to offer help in selecting the norms or integrating them and why to use a specific norm.
Workshop Program 04.09.2024
Workshop: Standards and Assessment Models
08.40 - 09.15
Opening by Hochschule München
EuroSPI Chair, Dr Richard Messnarz
Stan Stutton, President of the ISSPA, USA, and Prof. Ita Richardson of UL and Lero, Ireland, General Chair of ICSSP 2024
Automotive Skills Alliance, Dr Jakub Stolfa, ASA Director
iNTACS, Bernhard Sechser, Advisory Board Member
Samer Sameh, EuroSPI Chair for ASA Cooperation
EuroSPI Chair, Dr Richard Messnarz
Stan Stutton, President of the ISSPA, USA, and Prof. Ita Richardson of UL and Lero, Ireland, General Chair of ICSSP 2024
Automotive Skills Alliance, Dr Jakub Stolfa, ASA Director
iNTACS, Bernhard Sechser, Advisory Board Member
Samer Sameh, EuroSPI Chair for ASA Cooperation
09.30 - 10.30
Analysis of Automotive SPICE V4.0 changes
Damjan Ekert, ISCN GmbH, Austria , Elena-Flavia Povirnaru, Cariad SE, Germany, Andreas Gasch, Cariad SE, Germany, Ralf Mayer, Bosch Engineering GmbH, Germany, So Norimatsu, NP Lab, Japan, Alexander Feulner. Process Fellows GmbH, Germany, Brigitte Kurz-Grießnig, Engineering Center Steyr GmbH & CO KG, Austria, Peter Lindermuth, Magna Powertrain GmbH & CO KG, Austria, Rainer Dreves, Dreves Rainer SPICE Consulting, Germany, Rudolf Grave, TASKING Germany GmbH, Germany, Dr. Richard Messnarz, ISCN GmbH, Austria
Damjan Ekert, ISCN GmbH, Austria , Elena-Flavia Povirnaru, Cariad SE, Germany, Andreas Gasch, Cariad SE, Germany, Ralf Mayer, Bosch Engineering GmbH, Germany, So Norimatsu, NP Lab, Japan, Alexander Feulner. Process Fellows GmbH, Germany, Brigitte Kurz-Grießnig, Engineering Center Steyr GmbH & CO KG, Austria, Peter Lindermuth, Magna Powertrain GmbH & CO KG, Austria, Rainer Dreves, Dreves Rainer SPICE Consulting, Germany, Rudolf Grave, TASKING Germany GmbH, Germany, Dr. Richard Messnarz, ISCN GmbH, Austria
Navigating ISO 21434 and ASPICE from Organizational- to Project-Level Compliance
Darius Barmayoun, Politechnica University of Timisoara, Timisoara, Romania, and SynSpace Group GmbH, Freiburg, Germany, Martin Kemeter, SynSpace Group GmbH, Freiburg, Germany
Darius Barmayoun, Politechnica University of Timisoara, Timisoara, Romania, and SynSpace Group GmbH, Freiburg, Germany, Martin Kemeter, SynSpace Group GmbH, Freiburg, Germany
10.30 - 11.00
Coffee Break
11.00 - 12.00
A Study on Automotive SPICE Assessment Indicators Correlation with Product Quality
Mourad Mounir, Leading OEM [Confidential], Noha Moselhy, SEITech-Solutions GmbH, and Khaled Badr, Leading OEM [Confidential]
Mourad Mounir, Leading OEM [Confidential], Noha Moselhy, SEITech-Solutions GmbH, and Khaled Badr, Leading OEM [Confidential]
A Software Test Maturity Model Customized for Aerospace Industries: A Systematic Literature Review
Aysegül OZKURT, Ebru GÖKALP, Hacettepe University, Turkey, Aylin HATIP IPEK, ROKETSAN A.S., Ankara, Turkey
Aysegül OZKURT, Ebru GÖKALP, Hacettepe University, Turkey, Aylin HATIP IPEK, ROKETSAN A.S., Ankara, Turkey
12.00 - 13.30
Lunch Break
13.30 - 15.30
Fostering Cyber Resilience in Europe: An In-Depth Exploration of the Cyber Resilience Act
Christoph Schmittner, AIT, Austrian Institute of Technology GmbH, Graz University of Technology, Austria, Omar Veledar, Thomas Faschang, Georg Macher, Eugen Brenner, Graz University of Technology, Austria
Christoph Schmittner, AIT, Austrian Institute of Technology GmbH, Graz University of Technology, Austria, Omar Veledar, Thomas Faschang, Georg Macher, Eugen Brenner, Graz University of Technology, Austria
Implementing Process Increments in Sprints: An Approach for Complying with ASPICE
Sudeesh Bhat, Mourad Mounir, Khaled Badr, Leading OEM, Berlin, Germany
Sudeesh Bhat, Mourad Mounir, Khaled Badr, Leading OEM, Berlin, Germany
Platform Assessment – Challenges and Recommendations regarding Automotive SPICE
Martina Richerzhagen, Matthias Braunersreuther, Groher Patrick, Thomas Wegner, ZF Friedrichshafen AG, Germany, Bernhardt Steger, ISCN GesmbH, Austria
Martina Richerzhagen, Matthias Braunersreuther, Groher Patrick, Thomas Wegner, ZF Friedrichshafen AG, Germany, Bernhardt Steger, ISCN GesmbH, Austria
Automotive Cybersecurity Engineering Standardization and Regulation: An Integrated Model
Ahmed Adel Mohamed, MethodPark by UL Solutions, Germany, Heba Aslan and Tamer Arafa, Nile University, Giza, Egypt
Ahmed Adel Mohamed, MethodPark by UL Solutions, Germany, Heba Aslan and Tamer Arafa, Nile University, Giza, Egypt
15.30 - 15.45
Coffee Break
15.45 - 17.15
Key Note 1: LLM and GenAI based SE processes, International Panel led by Anita Carlton, SW Engineering Director SEI, Carnegie Mellon University, USA
Dr. Ipek Ozkaya, Carnegie Mellon University Software Engineering Institute Engineering Intelligent Software Systems Technical Director
Dr. Alexander Poth, Volkswagen AG, IT Quality Manager
John Robert, Carnegie Mellon University Software Engineering Institute Software Solutions Deputy Director
Roland Weiss, Head of R&D and Technology, ABB
Panel Chair: Anita Carleton, Carnegie Mellon University, Software Engineering Institute Executive Software Solutions Director, IEEE Fellow
Panelists are:
Professor Lionel Briand, Science Foundation Ireland Research Centre for Software, DirectorDr. Ipek Ozkaya, Carnegie Mellon University Software Engineering Institute Engineering Intelligent Software Systems Technical Director
Dr. Alexander Poth, Volkswagen AG, IT Quality Manager
John Robert, Carnegie Mellon University Software Engineering Institute Software Solutions Deputy Director
Roland Weiss, Head of R&D and Technology, ABB
17.30 - 18.30
Buses will bring the attendees to the Rosenheimer Herbstfest
Note: To reach the beer festival and not lose the places we must leave at 17.30 with the busses (sorry for that short time, but later reservations are not possible because the festival is so well known that other people/groups/tourists will compete/pay/invest for the places onsite). The buses are directly in front of the building. You can either store your bags at the conference location (locked till next morning), or you can take them to the bus and you will have the same bus on the journey back.
Note: To reach the beer festival and not lose the places we must leave at 17.30 with the busses (sorry for that short time, but later reservations are not possible because the festival is so well known that other people/groups/tourists will compete/pay/invest for the places onsite). The buses are directly in front of the building. You can either store your bags at the conference location (locked till next morning), or you can take them to the bus and you will have the same bus on the journey back.
Have a nice typical Bavarian festival, if possible in Lederhosen!
18.30 - 22.00
Traditional Bavarian Food, Beer and Music
Address: Herbststraße 2, 83022 Rosenheim, Germany
Address: Herbststraße 2, 83022 Rosenheim, Germany
Additional Information
We invite experts who are working with
• ISO/IEC , SAE, IEEE standards to be considered in systems, software services development
• ISO , SAE, IEEE standards to be considered in process improvement and innovation management
• ISO/IEC , SAE, IEEE standards to be considered in systems, software services verification
• New forthcoming ISO, SAE, IEEE standards that will impact the future development
• Working parties who are representing standards in ISO, SAE, IEEE
Papers shall present the standard, its background (what needs it addresses, which processes and content, hints for implementation, potential contacts to follow up).
Interactive Workshop Approach
Focus of interest and main questions discussed during the workshop will be:- New ISO, IEC, SAE, IEEE standards to be considered in systems, and software design
- New ISO, IEC, SAE, IEEE standards to be considered in services
- New ISO, IEC, SAE, IEEE standards to be considered in management
- New ISO, IEC, SAE, IEEE standards to be considered in innovation and improvement
- Comparing related IEEE, ISO, SAE norms
Each presentation will be discussed towards these main topics of interest. A panel discussion at the end shall come up with a summary of the solutions presented and with new research topics to focus on to solve this integrated approach (work for next year to meet at next EuroAsiaSPI and share again).