
Thomas Wegner
ZF Friedrichshafen AG, Germany
Main Moderator

Gerhard Griessnig
AVL, Austria

Damjan Ekert
ISCN GmbH, Austria

Samer Sameh
VALEO, Egypt
In systems, software, services development more and more ISO, IEC, SAE IEEE standards, are published and need to be considered. With every technology push on the market the standards are adapted to fulfil the new needs. For instance, the development of smart connected cars and industry 4.0 leads to a high demand for cybersecurity norms. In general there is a large variety of engineering standards in ISO/IEC, SAE, IEEE, and national standards. Depending on the domain (Automotive, Medical, Aerospace, IT services, SMEs, etc.) different norms are applicable. Still many norms show cross-sector synergy potentials. For instance the medical device and Automotive safety relevant standards contain complementary best practices where each group can learn from the other. Additionally there are norms dealing with innovation management and with process improvement and change management. Etc.
In this workshop series every year different ISO standards and assessment models will be introduced, explained, and discussed. This should offer an entrance to the world of norms but also to offer help in selecting the norms or integrating them and why to use a specific norm.
Workshop Program 08.09.2026
Local Time
07.40 - 08.15
CET Time
EuroSPI Chair, Dr Richard Messnarz,
Automotive Skills Alliance, Dr Jakub Stolfa, ASA Director,
iNTACS, Lars Dittmann, INTACS Director,
Samer Sameh, INTACS & EuroSPI Regional Representative
Local Time
08.30 - 09.30
CET Time
Schlager Christian, Kurz-Griessnig Brigitte, Magna Powertrain, Austria
Damjan Ekert, ISCN GmbH, Austria, Mary Roselind Michael, HELLA GmbH & Co. KGaA, Germany, Peter Theis, Magna Powertrain GmbH & CO KG, Austria, Valeria Franzitta, Bosch Engineering GmbH, Germany, Svatopluk Stolfa, VSB – Technical University of Ostrava, Czech Republic, Thomas Wegner, ZF Friedrichshafen AG, Germany, Alexander Feulner, Process Fellows GmbH, Germany, Elena-Flavia Povirnaru, Cariad SE, Germany, Alexander Much, Safionyx GmbH & Co KG, Germany, Andreas Gasch, Cariad SE, Germany
Local Time
09.30 - 10.00
CET Time
Local Time
10.00 - 11.00
CET Time
Gilbert Regan, Buddhika Gayashani, Fergal Mc Caffery, Regulated Software Research Centre, Dundalk Institute of Technology, Dundalk, Ireland
Noha Moselhy, Dina ElHakim, DXC Luxoft, Egypt, and Yosry Mohsen, SEITech Solutions GmbH, Germany
Local Time
11.00 - 12.30
CET Time
Local Time
12.30 - 13.15
CET Time
Key Note 1:Link -> EU and China Quality Bridge: A Roadmap of international norms and INTACS and ASQMS, Lars Dittmann and Stephan Müller, INTACS, and Wolfgang Wagner, ASQMS
Local Time
13.15 - 14.00
CET Time
Key Note 2:Link -> China Speed – The 5 Dimensions of the Systemic Approach for China Speed, Martin Brett, Vice President of Engineering, Robert BOSCH GmbH, Germany
Local Time
14.00 - 14.15
CET Time
Move to the rooms
Local Time
14.15 - 15.45
CET Time
Nina Aures and Andreea Pintilie, CARIAD SE, 38442 Wolfsburg, Germany
Samer Sameh, Tasneem Elbanna, Valeo Egypt
May Jamal, Noha Moselhy, Aleksei Koropatniuk, and Andrii Loboda, DXC Luxoft
Local Time
15.45 - 16.15
CET Time
Coffee Break and Snacks (Snacks because day 1 is longer and dinner late)
Local Time
16.15 - 17.00
CET Time
Key Note 3: Link -> Measuring Process Engineering Excellence with Process KPIsBrigitte Kurz-Griessnig, Magna Powertrain, Austria
Local Time
17.00 - 17.45
CET Time
Key Note 4:Link -> Innovate or Perish - Why Structured Innovation and Innovation Capability are Required in Europe, EuroSPI General Chair & Workshop Chair, Richard Messnarz, ISCN, Austria
Local Time
18.15 - 18.45
CET Time
Local Time
19.00 - 22.00
CET TIme
Original Egyptian Cuisine (link to social event page)
Workshop Program 09.09.2026
Local Time
07.00 - 08.00
CET Time
Local Time
08.00 - 08.45
CET Time
Key Note 5:Link -> Implementing Security Framework for Limited Resources IoT Environment via Smart Gateways, Dr. Ahmed Soltan, Associate Professor, Nile University, Egypt
Local Time
08.45 - 09.30
CET Time
Key Note 6: Link -> Experiences with Key Best Practices for Quality in VALEO, Ashraf Rizallah, Valeo Egypt Quality Director, VALEO,Egypt
Local Time
09.30 - 10.00
CET Time
Local Time
10.00 - 11.00
CET TIme
Schlager Christian, Kurz-Griessnig Brigitte, Mueller Norma-Constanza, Sauer Christian, Hager Heinz, Rosenstein Michael, and Mitterlehner Thomas, Magna Powertrain, Austria and Germany
Salma Abozaied, Samer Sameh, Valeo Egypt, QA-V-Core Department, Cairo, Egypt
Local Time
11.00 - 12.30
CET Time
Local Time
12.30 - 13.15
CET TIme
Key Note 7:Link -> Automotive Cybersecurity TARA Experiences at Vehicle Server Level - Major Content Update of the INTACS Certified ASPICE for Cybersecurity Training and EU Project Cybertester Results, Thomas Liedtke, Senior Cyber Security Expert, Independent Consultant, Germany, and Dr Richard Messnarz, Manager and Senior Expert, ISCN/SOQRATES Group, Graz, Austria
Local Time
13.30 - 14.30
CET Time
Svatopluk Stolfa, VSB-TUO, Czech Republic, Richard Messnarz, I.S.C.N. GesmbH, Austria, Thomas Geipel, Robert Bosch GmbH, Germany, Henrik Putzer, cogitron GmbH,Germany, Ute Schmalhofer, Wolfgang Wagner, ASQMS Deutschland GmbH,Germany, Thomas Liedtke, Independent Consultant, Germany, Christian Schlager, Magna Powertrain,, Austria, Lars Dittmann, Stephan Müller, INTACS, Germany, Mary Roselind, HELLA GmbH & Co. KGaA,Germany, Thomas Wegner, ZF Friedrichshafen AG, Germany, Patrick Weinberger, Independent Consultant, Germany, Jakub Stolfa, VSB-TUO, Czech Republic, and Damjan Ekert, I.S.C.N. GesmbH, Austria
Menna Noureldin, Valeo, Cairo, Egypt, Atef Ghalwash, Doaa S. Elzanfaly, Capital University, Egypt
Local Time
14.45 - 16.15
CET Time
Key Note 8: Link -> European Skills (R)Evolution - Feel (discuss) the wind of Change - Vision Statements and Panel, Dr Jakub Stolfa, President of the ASA, the Automotive Skills Alliance, Svatopluk Stolda (QMBB China - EU), Didier Stevens (ASA Hydrogen VET Forum), Laura Aschbacher (ASA innovation agent WG), Anna Spechtenhauser (European regional strategies), Thomas Geipel (Integrating Norms World Wide)
Local Time
16.30
CET TIme
Buses will bring the attendees to the pyramids area with a tourist guide and after that to a Nile river dinner cruise.
Local Time
18.30 - 22.00
CET Time
After that buses will bring the attendees to the Nile river and all attendees are invited to a Nile cruise and dinner.
If you plan to do private travel arrangements please use the recommended travel agency which we recommend on the travel page.
Additional Information
We invite experts who are working with
• ISO/IEC , SAE, IEEE standards to be considered in systems, software services development
• ISO , SAE, IEEE standards to be considered in process improvement and innovation management
• ISO/IEC , SAE, IEEE standards to be considered in systems, software services verification
• New forthcoming ISO, SAE, IEEE standards that will impact the future development
• Working parties who are representing standards in ISO, SAE, IEEE
Papers shall present the standard, its background (what needs it addresses, which processes and content, hints for implementation, potential contacts to follow up).
Interactive Workshop Approach
Focus of interest and main questions discussed during the workshop will be:- New ISO, IEC, SAE, IEEE standards to be considered in systems, and software design
- New ISO, IEC, SAE, IEEE standards to be considered in services
- New ISO, IEC, SAE, IEEE standards to be considered in management
- New ISO, IEC, SAE, IEEE standards to be considered in innovation and improvement
- Comparing related IEEE, ISO, SAE norms
Each presentation will be discussed towards these main topics of interest. A panel discussion at the end shall come up with a summary of the solutions presented and with new research topics to focus on to solve this integrated approach (work for next year to meet at next EuroAsiaSPI and share again).
